Go to the Start Menu and select Control Panel.

If you are using Category View open 'Network and Internet Connections'

Then click on 'Network Connections.'

If you are using Classic View open 'Network Connections.'

Click on 'Create a new connection.'

Click Next.

Select 'Connect to the Internet' and click Next.

Select 'Set up my connection manually' and click Next

Select 'Connect using a dial-up modem' and click Next.

Type 'Telerama' in the ISP Name field and click Next.

Enter your local access number and click Next.

Enter your Username and Password. Check the appropriate options and click Next.

Check 'Add a shortcut to the connection to my desktop' and click Finish.

Right click on the Telerama icon and select 'Properties.'

Select 'Use dialing rules' and enter the Area code for your local dialup. Click on the 'Dialing Rules' button.

Click on your location and then click Edit.

Enter your Area code and Select the 'Area Code Rules' tab.

Click New.

Enter your Area code and select 'Include the area code.' Click OK. Click OK. Click OK. Click on the 'Options' Tab.

Uncheck 'Include Windows logon domain.' Check appropriate other options. Click on the Security Tab.

Select Typical and set 'Validate my identity as follows:' to 'Allow unsecured password.' Click on the Networking Tab.

Set 'Type of dial-up server I am calling:' to 'PPP: Windows 95/98/NT 4/2000, Internet'. Make sure "Internet Protocol (TCP/IP)" and "Client for Microsoft Networks" are installed and checked. If not, click ADD and select 'Client' from the list, pick 'Microsoft' from the Manufacturers List and 'Client for Microsoft Networks' from the list of Clients. Then click ADD again and select 'Protocols,' 'Microsoft,' and finally 'Internet Protocol (TCP/IP).' You may need to restart your computer when this is finished. Click on "Internet Protocol (TCP/IP) and then Properties.

Make sure "Obtain and IP address automatically" and Optain DNS server address automatically" are selected. Click OK. Click OK.

Double click on the Telerama icon.

Enter username and password if not already present. Click Dial

You are now Connected.